AZTECH DSL605ER DRIVER

When you connect a router to the Internet it gets a few settings from your ISP automatically. This way you can protect your entire network from ISP hijacking with just one setting. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. Once the power light stops blinking, the unit has been reset and is ready to use. We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in. Turn on router Press Factory Reset button and hold for at least 15 seconds Device restarts automatically Default settings have been restored The unit will reboot automatically. Accessing your router’s configuration interface To connect to your router’s web interface, follow these steps:

Uploader: Visar
Date Added: 10 April 2004
File Size: 47.93 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 97313
Price: Free* [*Free Regsitration Required]

Screenshots – Aztech – DSL605ER (Aztech Firmware)

Under this are two boxes. If you are already logged in you can skip this step. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.

This way you can protect your entire network from ISP hijacking with just one setting. Most devices on your network will not begin using the new DNS settings until they have been rebooted. For instance, when you go to “google. After rebooting a device you can go to it’s network settings and verify that it is using the DNS servers that you specified.

  MS 865PEM2 SES DRIVER DOWNLOAD

How to Configure and Reset Aztech DSLER Router

Here are common settings: Once the power light stops blinking, the unit has been reset and is ready to use. There are 2 really great DNS servers on the Internet that you can choose from right now: However, as a compromise, you will have to enter the SSID every time that you connect a device to the network.

Then your network will not be so easily hacked. Some Aztech routers come with default network names with the name of the dls605er. This step is not mandatory.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. This may be changed at will by unchecking the corresponding box in the settings.

When you connect a router to the Internet it aztedh a few settings from your ISP automatically.

Aztech DSL605ER

Click the blue Submit button in the lower right corner and you are finished! Turn on router Press Factory Reset button and hold for at least 15 seconds Device restarts automatically Default settings have been restored The unit will reboot automatically.

The unit will reboot automatically. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to “some-random-site. The first benefit is that all the rooms in your house have the same access to the Internet.

  FUJI XEROX DOCUCENTRE 2056 DRIVER DOWNLOAD

SG :: Aztech DSLER DSL Router

The secondary is only used if the primary can not be located. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. Be sure to update this information if you add or remove devices. By changing your DNS setting in your router you will effectively change the DNS setting for every aztefh on your network.

Here are common settings:. You are now on the right page to change the DNS Server settings. We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.

This can be done in a way that you don’t know it is happening since your router is getting its DNS settings from your ISP.

Open a web browser, such as Google Chrome, and enter the IP address of your router in the address bar. Accessing your router’s configuration interface To connect to your router’s web interface, follow these steps: